Zibo Kaichuang Plastic Co., Ltd.
+8618053328687
PVC Expansion Sheet Board

PVC Expansion Sheet Board

PVC expansion sheet board for cabinet and furniture fabrication. Standard sheets are 1220 × 2440 mm; 12, 15 and 18 mm are common starting points for cabinet parts. Density is selected around 0.55–0.70 g/cm³ according to panel size, support and hardware. White boards, larger sizes and custom finishes can be discussed. Send your drawing and quantities for a sample and quotation.

Send Inquiry
  • Description

    PVC Expansion Sheet Board for Cabinet Fabrication

    Blank PVC foam sheets for cabinet shops that need predictable cutting, a suitable face and a board specification matched to each component.

    Common starting points: 12, 15 and 18 mm for cabinet parts; approximately 0.55–0.70 g/cm³ according to the panel design. Standard sheet size: 1220 × 2440 mm. Send your drawing for a recommendation and sample.

    This page is for buyers specifying PVC expansion sheet board for kitchen and bathroom cabinets, wardrobes, shelves and routed interior pieces. We supply the board as sheets; the final thickness, density and fixing method should be confirmed against the part drawing. A cabinet door with hinges, a long shelf and a supported back panel are different orders even if the sheet color is the same.

    For a general comparison of 4×8 sheets across signs, printing and furniture, see our 4×8 PVC Foam Board Sheet page. Here we concentrate on cabinet fabrication and the details needed to place an order.

    Overlapping white PVC foam board cut samples

    White board face and cut shape
    Small samples allow an initial check of the surface, color and corner finish.

    Stack of white PVC foam boards showing flat faces and side profiles

    Board face and edge profile
    Confirm the actual thickness and density target before scaling a sample into full cabinet sheets.

    Cabinet Board Specification

    Product Rigid PVC foam sheet with a foamed core; Celuka construction is a common starting point for cabinet bodies and machined parts.
    Regular sheet 1220 × 2440 mm. Larger 1560 × 3050 mm and 2050 × 3050 mm formats can be discussed for the selected board and shipment.
    Thickness to discuss 12, 15 and 18 mm for many cabinet parts. A supported back or liner may use 5, 8 or 10 mm if the design permits.
    Density target Approximately 0.55–0.70 g/cm³ for cabinet use, selected according to support, finished dimensions and fastening. State the target on the order.
    Color and surface Regular white board; custom color, co-extruded face or decorative film can be discussed when a visible finish is required.
    Processing Saw cutting, drilling, CNC routing, fastening and lamination should be trialed on the chosen grade before volume production.
    Standard packing Plastic bags included in the regular quotation; cartons or pallets available at additional cost.

    Choose by Cabinet Component

    Thickness is only a starting point. Panel span, load, support, hardware and visible edge determine what a workshop should test. The ranges below help prepare an inquiry; they are not structural ratings.

    Part Starting point What to confirm
    Cabinet sides and fixed dividers 12 / 15 / 18 mm Finished size, joint layout, support and surface finish.
    Doors and hinge-bearing parts 15 / 18 mm; discuss density and construction Door dimensions, hinge count, pilot hole and screw trial on the selected board.
    Shelves 15 / 18 mm to review Clear span, expected contents, support points and acceptable deflection.
    Supported backs and liners 5 / 8 / 10 mm where suitable Frame support, fixing method and whether the part carries a load.
    CNC decorative components Select from the drawing Narrowest cut detail, edge appearance, joints and finishing trial.

    For a thickness-specific product, compare our 10mm cabinet board or 18mm PVC foam board after the component has been defined.

    What to Check Before Batch Cutting

    White PVC foam board samples showing their side profiles

    Thickness and cut edge
    Compare sample thickness with the drawing. Use the actual board to trial the saw blade or router, then inspect the face, edge and rounded corners.

    White PVC foam board reference sample standing upright

    Fixing and finish
    Drill and fasten a representative piece using the specified hinge or screw. If a decorative film or coating is planned, trial the adhesive and edge treatment as well.

    Keep an approved sample from the chosen grade as a reference when your workshop starts the production run.

    Application Scenes and the Board Behind Them

    These images show examples of finished forms. A cabinet builder still needs to select the board and assembly method for the specific installation.

    Bathroom vanity with open doors and interior shelves

    Bathroom vanity interior
    The open vanity shows side panels, a fixed shelf and hinge locations. For this type of cabinet, send the panel sizes, door hardware and moisture-exposed joint details.

    White wall-mounted bathroom vanity

    Visible vanity panels
    A flush white face requires attention to surface appearance, door alignment and the finish on visible cut edges. Confirm the actual board and hardware with a sample.

    Decorative carved white interior room divider

    CNC-carved interior divider
    The carved screen shows narrow cut details and joined panels. Share the pattern and minimum bridge width to discuss routing and edge appearance.

    Interior storage cabinet and bathroom vanity application collage

    Storage and fitted furniture
    This two-scene collage illustrates fitted storage and a bathroom unit. Specify clear shelf span, back-panel support and door fixing for the intended furniture.

    Kitchen cabinet bodies, wardrobes and supported drawer bottoms are further uses of cut-to-size sheets. For a kitchen order, identify the hinge-bearing doors, long shelves and supported internal panels separately in the part list.

    Our Factory: Production, Stock and Export Packing

    Kaichuang manufactures PVC foam boards in Zibo, Shandong, at a production site of more than 20,000 m². The photographs show our extrusion line, sheet stock and packed boards. We confirm board type, sheet size, thickness, density target, surface, quantity and packing against the order before production.

    Kaichuang PVC foam board extrusion line in Zibo workshop

    Production line
    Board construction and order specification are agreed before the manufacturing run.

    Kaichuang PVC foam sheet stacks in the workshop

    Finished sheet stock
    We check size, thickness, surface appearance and the agreed weight or density target for the order.

    PVC foam sheets with protective packing and pallet frames at Kaichuang

    Packing option
    This photograph shows pallet-framed packing. Standard plastic-bag packing is included; pallet or carton packing is quoted separately.

    White PVC foam board sheets stacked in Kaichuang workshop

    Sheet handling
    Confirm mixed specifications by thickness, density and quantity before the loading plan is finalized.

    More views of the factory and production environment:

    Kaichuang factory and workshop collage

    Kaichuang PVC foam board production collage

    Samples, Packing and Order Terms

    Sample Regular 10 × 15 cm samples are free; the buyer pays courier charges. Ask about a larger or machined sample if you need a full fitting trial.
    MOQ and mixed orders The regular starting MOQ is around 200 sheets. A full container can combine agreed thicknesses or densities without requiring 200 sheets of every specification. Send the itemized quantities for review.
    Packing Regular plastic-bag packing is included. Carton or pallet protection is available for an additional charge; choose it before the final quote.
    Production time Usually 7–15 days after the order details are confirmed; custom color or finish needs a separate schedule check.
    Shipment FOB Qingdao is a common quotation basis. CIF can be discussed when you provide the destination port. Container loading depends on the item mix, weight and packing.

    For a precise offer, send the thickness, density target, sheet size, color or finish and quantity for each item. Include your cabinet drawing, packing choice and destination port.

    Cabinet Board Questions

    Can density alone tell me whether a hinge will hold?

    No. Board thickness and construction, screw size, pilot hole and distance from the edge also matter. Try the exact fitting on a representative sample.

    Can a thin board be used behind a cabinet?

    Yes, if the back is supported and fixed as designed. Tell us the frame layout and whether that panel must carry any load.

    Will a bathroom cabinet need edge sealing?

    The PVC board is moisture resistant, but the complete cabinet still needs suitable joints, fittings and installation details. Check the intended adhesive or decorative film on a sample.

    Do you sell ready-made cabinet units?

    This product is supplied as blank foam sheets for cabinet fabricators. If you need cut parts, send drawings and tolerances so that feasibility can be discussed before quotation.

    What should I send to get an accurate price?

    Send the part use or drawing, sheet size, thickness, density target, face requirement, quantity per specification, packing choice and destination port. We can then discuss the sample and loading plan.

    Request a Cabinet Board Specification and Quote

    Send a drawing or part list and the quantities you expect to buy. We will confirm a practical sheet specification, packing choice and quotation basis for your project.

    Celina Yue | Sales Manager
    WhatsApp: +86 180 5332 8687
    Email: Celinayue@kaichuangplastic.com

    Hot Tags: PVC expansion sheet board, China PVC expansion sheet board manufacturers, suppliers, factory, pvc appropriate cabinet board, pvc flame retardant cabinet board, pvc impact resistant cabinet board, pvc built in cabinet board, pvc storage board, pvc space-saving cabinet board

(0/10)

clearall