Zibo Kaichuang Plastic Co., Ltd.
+8618053328687
4x8 Sintra PVC Foam Board
video

4x8 Sintra PVC Foam Board

4x8 Sintra PVC Foam Board is becoming an alternative to wood in many areas such as the advertising and furniture industries. Plan your next cutting job around Kaichuang’s 1220 × 2440 mm PVC Celuka sheets. This commercial 4x8 format provides a practical starting size for display panels, furniture components and interior inserts, with thickness, density, face condition and packing specified to suit the finished work.

Send Inquiry
  • Description

    sintra 09

    A Full Sheet with Room for Your Part Layout

    A 4x8 PVC foam board is a sheet format, not a performance grade. On this page, the supplied material is Kaichuang-manufactured Celuka PVC: a rigid foamed sheet with an integral outer skin and a cellular interior. The format gives your workshop a known starting rectangle; the selected thickness and density then define the material to be quoted and sampled.

    The nominal 1220 × 2440 mm sheet covers 2.9768 m² before trimming. That area can accommodate one large panel or a group of smaller components, depending on the drawing. Starting with the actual part layout helps establish whether the regular sheet is suitable or whether another format deserves a separate production check.

    Specifications to Put on the Enquiry

    Item Supply Information
    Product identity Kaichuang PVC Celuka foam sheet; not supplied as original SINTRA-branded material
    Commercial format 4x8; contractual nominal dimensions for this offer are 1220 × 2440 mm
    Nominal sheet area 2.9768 m² before edge trimming and cutting losses
    Thickness and density Confirm the selected Celuka grade and tolerances with the quotation. The wider factory portfolio covers 1–30 mm and 0.31–0.90 g/cm³; this does not establish every combination for this product
    Appearance White standard; agree the required face finish and any custom colour against a sample
    Conversion Sawing, drilling and routing; ink, film and adhesive compatibility to be established for the selected finish
    Packing choices PE bags, cartons, pallets, protective film and OEM marks, selected for the order
    Other sizes Company formats include 1560 × 3050 mm and 2050 × 3050 mm. Confirm the process, thickness and density available for a non-standard request

    Use millimetres on drawings and purchase orders even when your team calls the material 4x8. This makes it easier to align the cutting file, incoming inspection and the dimensions stated in the supplier's quotation.

    sintra 1

     

    Why This Format Can Work for Bulk Buyers?

    One Size Reference Across Departments

    Purchasing, production and receiving can work from the same nominal sheet dimensions. A consistent reference reduces ambiguity when comparing an incoming sheet with a drawing, stock record or cutting program. Keep the dimensional tolerance on that reference as well.

    A Continuous Panel Where the Drawing Permits It

    A component that fits the usable sheet area can be planned as one piece rather than assembled from smaller blanks. This can simplify the visible layout of a sign or decorative insert, subject to the fixing and handling arrangement.

    An Integral Celuka Face

    The board's outer skin provides a working surface for the proposed finish. Check the appearance of that surface against the intended use: a visible indoor panel, a printed display and a concealed cabinet back need different acceptance criteria.

    More Transparent Material Costing

    The nominal area allows a per-sheet quote to be converted to a price per square metre. Combine that figure with the cutting layout and material specification. This separates the price of the sheet from the cost of waste, conversion and finishing.

    An Adaptable Stock Format

    Distributors can organise the regular sheet footprint across clearly separated thickness and density grades. Marking those grades accurately helps fabricators reorder the right material without treating all boards with the same outer dimensions as interchangeable.

    sintra 2

     

    Applications for the 1220 × 2440 mm Format

    Exhibition and Indoor Graphic Panels

    The full-sheet format can be considered for framed display infill, graphic backings and shaped sign components. Define whether the sheet will be direct printed, laminated or otherwise finished, and show the support positions on the design.

    Cabinet Backs and Furniture Infill

    For cabinet details and furniture components, begin with the part dimensions and connection method. Select thickness and density around the proposed assembly. A backing panel, hinged part and load-carrying shelf should not receive the same approval merely because they share a sheet size.

    Interior Partitions and Decorative Surfaces

    Regular rectangular sheets can supply framed inserts, non-structural partitions and decorative panel work. Identify joints, exposed edges, cleaning requirements and the installation environment when requesting a material recommendation.

    Batch-Cut Blanks and Workshop Stock

    Fabricators producing several smaller parts can assess a shared layout before ordering full sheets. Group parts by grade and finish so a visually similar offcut is not used in place of the specified material.

    From Full Sheet to Finished Component

    Match the processing trial to the actual work. Include a representative cut edge, hole or routed feature, and record the tooling, feed conditions and workholding. For a printed part, check image placement against the cut outline. For a bonded or laminated part, use the intended adhesive and finish during approval.

    Agree which face is visible and whether protective film is needed. If film must stay on during cutting, evaluate that exact arrangement and its removal afterwards. A transport protection requirement and a machining requirement should be described separately in the enquiry.

    Define the Delivered Sheet You Will Accept

    For repeat orders, specify checks for sheet dimensions, thickness, density, flatness and face condition. Agree the measurement method and any numerical limits with the order. Keep a retained sample or an inspection record connected to the quoted grade, particularly where different workshops will receive the material.

    Kaichuang holds ISO9001 quality management system certification and can support SGS testing to an agreed order scope. If a project depends on a fire class, fixing performance or another tested property, request evidence covering the proposed material. Neither the 4x8 size nor a general certification statement establishes those values.

    sintra 03

    Packing the Full Footprint for Export

    Agree how the full sheet footprint will be supported and protected. Packing can combine PE protection, cartons, corner protection, pallets and customer marks according to the handling route. Specify any restrictions on pallet height, unloading equipment or delivery access before the packing arrangement is finalised.

    The loading quantity must be calculated for the selected sheet thickness, density and packed dimensions. A container estimate for another grade should not be reused as a commitment. We can discuss a shipment arrangement after the order mix and destination are defined.

    Direct Factory Supply and Order Follow-Up

    Zibo Kaichuang Plastic Co., Ltd. manufactures PVC sheet products at a 20,000+ m² factory with 7 production lines. Alongside Celuka material, our portfolio includes free foam and co-extruded options. This allows the buying discussion to consider the required surface, processing route and final component as well as the sheet format.

    If a delivery or processing question arises, provide the order reference, relevant measurements and photographs of the sheet and packing. For a machining concern, include the part drawing and operating conditions. We can then review the issue against the agreed supply specification and discuss the appropriate next step.

    sintra 04

     

     

    sintra 05

    sintra 06

    Our board has passed SGS and ISO9001 certificates, COC test Quality is up to world standard. Quality is top in Shandong, price competitive.

    sintra 07

    sintra 08

    Our factory has a big warehouse to stock, and we are near Qingdao port, land freight lower.

    Frequently Asked Questions

    1.Is this original 4x8 SINTRA PVC foam board?

    This offer is for Kaichuang-manufactured Celuka PVC sheet. SINTRA is a brand marketed by 3A Composites. If your customer requires that specific branded material, confirm the requirement before considering a separately manufactured alternative; matching sheet dimensions does not establish equivalence.

    2.Is 1220 × 2440 mm exactly the same as 4 × 8 ft?

    No. Exactly 4 × 8 ft converts to 1219.2 × 2438.4 mm. The commercial format offered here is nominally 1220 × 2440 mm. Use the quoted metric dimensions and tolerances for machine files and final part planning.

    3.How can I estimate the weight of a full sheet?

    For nominal 1220 × 2440 mm material, estimated board mass in kilograms is:

    2.9768 × thickness in millimetres × density in g/cm³

    This excludes protective film and packing. Use measured dimensions and density when checking an actual sheet.

    4.Which thickness and density should I choose?

    Send the part size, application, support arrangement and finishing method. We can discuss a proposed Celuka grade and confirm its available specification. The company-wide thickness and density ranges are not a promise that every combination is available or suitable.

    5.Can you provide cut-to-size pieces?

    Full-sheet supply is the basis of this page. If you require finished blanks, submit a part list with quantities, tolerances and edge requirements. We will confirm whether the requested cutting service can be included and how it affects the quotation and packing.

    6.Can I print on the sheet or use it outdoors?

    Confirm the intended ink, finish and exposure conditions. Printing should be approved on the selected surface, while outdoor suitability requires a review of the grade, colour, temperature exposure and mounting design. Indoor material should not be selected for exterior use from its size alone.

    7.What testing documents are available?

    Tell us the destination market, required standard and property to be verified. We can review existing documents and discuss order-specific SGS testing where required. A test report must relate to the supplied grade and its applicable scope.

    8.What are the MOQ, sample terms and lead time?

    They depend on the confirmed material grade, colour, finish, quantity and packing. Include these details in the enquiry so sample arrangements, minimum quantity and production timing can be quoted for the actual order rather than assumed from another product page.

    Send Your 4x8 Sheet Requirement

    Tell us the nominal sheet dimensions, thickness, density target if known, application and quantity. Attach a cutting layout or part list when yield matters, and include surface protection and delivery requirements. Our team can prepare a quotation around the proposed sheet specification and identify any details needing further confirmation.

    Hot Tags: 4x8 sintra PVC foam board, China 4x8 sintra PVC foam board manufacturers, suppliers, factory, insulation material pvc foam board, decorative panel made of pvc foam board, childcare center interior with pvc foam board, anti corrosion treatment for pvc foam board, packaging material pvc foam board, crown molding with pvc foam board

(0/10)

clearall