Product Introduction
Our signage PVC foam board is a Celuka sheet for sign makers, print shops and display fabricators. A smooth white outer skin and foamed core make it a practical substrate for printed graphics, adhesive films, routed letters and lightweight display panels.
Start with the finished sign: its dimensions, printing method, support and installation environment. We can then help you compare suitable thickness and density options.
For small, supported printed panels, explore our 3mm white PVC foam board. Larger panels, frequently handled displays and routed shapes may require a different specification.
This product uses the Celuka process. If you currently use PVC free foam board, compare samples for surface finish, ink adhesion and cutting performance before changing materials.

Advantages for Sign Making
Smooth surface for graphics
White sheets provide a surface for UV flatbed printing and graphic mounting. Test the selected grade with your actual ink or adhesive film before starting a production run.
Manageable sheet weight
The foamed core reduces weight compared with solid PVC of the same dimensions. Specifying density makes sheet-weight and quotation comparisons more meaningful.
Practical cutting and routing
Suitable equipment can produce shaped panels, lettering, drilled holes and display components. Tool condition, sheet support and core structure all influence the finished edge.
Moisture-resistant substrate
PVC sheets suit indoor signs that need occasional damp wiping. Select graphics, adhesives and fixings for the same intended environment.
Product Specifications
| Item | Details |
|---|---|
| Product | Signage PVC Foam Board |
| Foam Process | Celuka |
| Standard Size | 1220 × 2440 mm / 4 × 8 ft |
| Thickness Options | 3, 5, 8 and 10 mm; other thicknesses available on request |
| Density Options | 0.40, 0.45 and 0.50 g/cm³; confirm availability for the selected thickness |
| Colour | Standard white; other colours subject to specification and quantity |
| Surface | Smooth, dense outer skin with a foamed core |
| Processing | UV printing, graphic mounting, sawing, drilling and CNC routing |
| Protective Film | Optional; specify one or both faces |
| Order Requirements | Agree density, thickness tolerance, dimensions, flatness and surface acceptance before production |
Specify thickness and density together. Neither alone determines how a finished sign will perform.
Choosing Thickness & Density
A sheet bonded to a flat backing behaves differently from a panel fixed only at its edges. Begin with the mounting design, then compare thickness, density and handling requirements.
| Sign or Display | Thickness Starting Point | Selection Checks |
|---|---|---|
| Small mounted signs and graphic panels | 3 mm | Check backing support, finished size, print adhesion and handling. |
| Retail graphics and exhibition panels | 3–5 mm | Compare stiffness, mounting points and protection during repeated transport. |
| Larger framed or supported panels | 5–10 mm | Assess span, frame design and fixing positions with a full-size trial. |
| Routed lettering and shaped signs | 5–10 mm, depending on design | Check narrow strokes, holes, edge finish and the required visual depth. |
Signage Applications
Directional & Information Signs
Wall-mounted wayfinding panels, room labels and indoor information boards. Select panel dimensions and fixings around the supporting wall or frame.
Retail Graphics & Promotional Panels
Shelf graphics, display headers and promotional panels. Compare white shade and print appearance when several panels will be displayed together.
Exhibition Displays
Printed panels and lightweight display components. Reusable displays need careful corner protection and a packing method that protects the printed faces.
Cut Lettering & Decorative Shapes
Routed letters, logos and display elements. Trial the smallest details and narrowest sections before producing a complete set.
Outdoor Projects
Confirm exposure conditions, formulation and intended service life before selecting a grade. Standard sheets should not automatically be treated as UV-stabilised exterior products. Large outdoor signs also require an appropriate frame and fixing design.

Printing, Cutting & Mounting
Before printing: Remove protective film from the print face, keep the surface clean and test adhesion with the actual ink system. Confirm that the sheet sits flat on the printer bed.
Before graphic mounting: Test the intended adhesive film or mounting tape on a sample. Check bonding and the finished surface before producing the full batch.
During cutting and routing: Use sharp tools and secure the sheet on a flat support. Establish tool settings through trials, particularly for small lettering and narrow shapes.
During installation: Support the panel appropriately, avoid overtightening fixings and allow for thermal movement. Confirm adhesive compatibility with both the PVC sheet and the supporting surface.
Factory & Quality Control
Zibo Kaichuang Plastic Co., Ltd. has manufactured PVC foam boards in Zibo, Shandong, China since 2017. Our factory covers approximately 20,000 m² and supplies Celuka, free foam and co-extruded sheets. Visit our PVC foam board factory page for more about our manufacturing operation.
For sign-making orders, agree the checks that matter to your workflow: sheet thickness and density, full-sheet flatness, surface marks, white shade and cut dimensions. Retain an approved sample as a reference for repeat purchases.


Packing & Shipping
Sheets need flat support and protection at exposed corners and edges. Plastic-bag, pallet or carton packing can be selected to suit your unloading and distribution method. One standard packing option is included; combined pallet-and-plastic-bag packing requires an additional charge.
Mixed specifications can be arranged for full-container orders. Loading quantities depend on sheet dimensions, density, total stacked thickness, packing and the applicable weight limit. Send the quantity of each specification for a loading proposal.
Standard production lead time is generally 7–15 days after order confirmation and receipt of the deposit, subject to the production schedule. Protective film may require additional time. Store sheets flat, away from excessive heat and direct sunlight.

FAQ & Request a Quote
Which thickness should I choose for a sign?
Tell us the finished panel size, support design and handling requirements. We can suggest sample specifications; a full-size trial is useful for larger panels.
Is a higher-density sheet always better?
Higher density increases sheet weight and may change machining and handling characteristics. Select a grade around the actual job rather than density alone.
Can the board be printed directly?
Yes, it can be used for UV flatbed printing. Test ink adhesion and print quality on the selected grade with your own equipment and ink.
Can it be used outdoors?
Confirm the formulation, exposure conditions and intended service life first. Graphics, mounting and thermal movement also need to be considered.
Can I order samples or mixed specifications?
Standard samples are free, with courier costs paid by the buyer. Mixed sizes, thicknesses and densities can be discussed for a full-container order.
Tell Us About Your Sign Project
For a signage PVC foam board quotation, send your sheet size, thickness, density if known, quantity, processing method and destination port. If density is unknown, describe your current board or provide its sheet weight.
Celina Yue | PVC Foam Board Export Sales
WhatsApp: +86 18053328687
Email: Celinayue@kaichuangplastic.com
Hot Tags: signage pvc foam board, China signage pvc foam board manufacturers, suppliers, factory, farmhouse interior with pvc foam board, packaging material pvc foam board, control panel made of pvc foam board, cottage interior with pvc foam board, artwork made of pvc foam board, lobby interior with pvc foam board











